Basic Info.
Product Description
Functional Overview
GCAN-PLC-320/321/322 is a programmable logic controller (PLC) with integrated bus control function. It not only has the characteristics of simple appearance and high cost performance, but also can be easily connected to CAN bus system and Modbus system, etc., and can be expanded through plug-in modules.
Programming Software
GCAN-PLC-320/321/322 is a programmable logic controller (PLC) with integrated bus control function. It not only has the characteristics of simple appearance and high cost performance, but also can be easily connected to CAN bus system and Modbus system, etc., and can be expanded through plug-in modules.
Performance characteristics
Programming software: OpenPCS/Codesys (programming language complies with IEC61131-3 standard);
Support CANopen protocol master/slave function (supported by GCAN-PLC-321/22);
Support ModbusRTU master/slave function;
The number of expandable IO modules is up to 16; By default, 4 PDOs (CANopen) are sent and 4 PDOs (CANopen) are received. (GCAN-PLC-321/22 supported);
The configuration mode is automatic configuration;
The power supply adopts DC+24V;
the maximum input current is 1A;
Communication isolation is 1500V DC;
Working temperature range: -40ºC~+85ºC;
Protection level: IP20;
EMC anti-interference level: Zone B;
EMC anti-interference support: power supply channel, RS485 channel, CAN1 channel.
GCAN-PLC-320/321/322 products consist of a programmable main control module (GCAN-PLC-320/321/322, etc.), several GC series IO modules (GC-1008, GC-3804, etc.) and a terminal resistor Module (GC-0001). GCAN-PLC-320/321/322 main control module can connect to all GC series IO modules. Users can choose to expand the IO modules according to the actual needs of the site. The number of IO modules can be expanded up to 16. The main control module can be inserted according to the IO module. Addresses are automatically assigned to the front and rear positions to achieve automatic configuration. Users do not need to create a configuration interface and set parameters on the PC.
Application
